Fig 7.2 Timing Chart Of Servo Off Input Signal And Brake Control Output Signal; Fig 7.3 Timing Chart Of Brake Control Signal When The Motor Is Stopped During The Rotation - OE Max Controls CSDJ Plus User Manual

7 - 6 CSDJ Plus Servo Drive User's Manual
• When motor stopped during the rotation, operate the brake.
The brake signal will be output if and only if,
Adjust by watching the operation of motor.
Servo OFF
Alarm or
Power OFF
Motor Speed
Set value of SEt-30
BK+
External input signal SV-ON
(CN1 pin 3)
BK+ Output
(CN1 pin 47)
Internal servo ON/OFF state
(PWM output ON/OFF state)
Fig 7.2 Timing Chart of Servo OFF Input Signal and
Brake Control Output Signal
Motor Speed < Set value of SEt-30
Exceeding time set in SEt-31 after Servo OFF
Servo ON
Brake OFF
Set value of SEt-31
Fig 7.3 Timing Chart of Brake Control Signal when
the Motor is Stopped during the Rotation
Servo ON
Brake OFF
Servo ON
Set time of SET-29
or
Brake OFF
DB stop or free run stop
(Depends on the setting of LED No. 1 of SEt-44)
Brake ON
Servo OFF
Brake ON
Servo OFF
Time