• Example of Step 4 Speed Command Usage
SEt-41=14
SEt-44 LED No.5 = 0(Factory setting) Set into On status when CN1 pin 10 is 'Closed'
SEt-46 LED No.4 = 2
SEt-46 LDE No.5 = 3
-------
P-CON
Speed Control (OFF
-----
P-CL
P-CL, N-CL is operated
------
N-CL
by external current limit input
Step 4 speed
Not related
command
Pin 10
Direction conversion
Not related
command
Pin 15
Motor Speed
)
Forward
Step 1
Speed
Fig 6.8 Example of Step 4 Speed Command Usage
Chapter 6. Basic Functions 6 - 11
Sets to speed/multi step speed control mode
Set the CN1 pin 10 to input of 'step 4 speed
command'
Set the CN1 pin 15 to input of 'direction
conversion command'
Multi Step Speed Control (ON)
Reverse
Step 3
Step 2
0
Speed
Speed
Speed command of step X is ignored
Forward
Step 4
Step 4
Step 1
Speed
Speed
Speed
0