Fig 2.10 Example Of Wiring In Main Circuit - OE Max Controls CSDJ Plus User Manual

The figure below is the example of wiring in main circuit of CSDJ Plus.
Use the push button switch, which is connected
when the button is pushed.
Press the button for about 1 second.
Circuit
Breaker
Power
Also connect the
power ground to
the PE terminal
Plate
Power 24V
Do not turn on/off the power frequently.
Because the servo drive has capacitor in the power part, large inrush current
!
flows when the power is turned on. Thus, turning on/off the power frequently
Warning
may cause the deterioration of the main power elements in the servo drive and
may cause problems, such as reduced life span, and etc.
Power Off S/W
1 Relay
1 MC
Noise
Filter
Frame
1 Relay
SALM+
External
SALM-

Fig 2.10 Example of Wiring in Main Circuit

Chapter 2. Installation and wiring 2 - 15
Power On S/W
1 MC
1 Relay
Alarm Lamp
L1 U
L2 V
W
PE
CN1-45
CN1-46
Connect when there is a
need to cut off the power
according to the alarm.
1 MC
M