Fig 3.10 Operation Pattern Of The Test Run; Fig 3.11 Test Run Using The Operator - OE Max Controls CSDJ Plus User Manual

3 - 16 CSDJ Plus Servo Drive User's Manual
3.4 Test Run
In the operator, test run can be done using the following operation pattern.
Operate in USr-90.
Starting and ending the test run can be done with
time is 14 sec.
During the test run, all of user parameter can
be referred to or set using the operator.
Motor Speed
Jog Speed
(SEt-25)
Operation time for the test run is already set. Be cautious when the load is
!
connected.
Warning
Test run only when the emergency stop is possible at any time.
Deceleration Time
(SEt-20)
Forward Revolution
5 sec. 2 sec.

Fig 3.10 Operation Pattern of the Test Run

ENTER
Start Startup

Fig 3.11 Test Run Using the Operator

MODE
key. Repeat until it is stopped. 1 cycle
SET
Acceleration Time
(SEt-19)
5 sec. 2 sec.
Reverse Revolution
ENTER
MODE
SET
Stop Startup
MODE
SET