Fig 4.1 Operator - OE Max Controls CSDJ Plus User Manual

4.1 Operator
Data set by the operator is saved in servo drive even if the power has been cut off.
More than last 10 contents of error are saved, thus the error can be checked when the problem
occurs. (It's saved in parameter PAr-01 ~ PAr-10.)
Resets the error in USr-07 or
status display mode
Moves between each modes,
Record the changed data,
auto tuning and offset auto
adjustment etc.
Turns on the JOG from USr-01
Chapter 4. Using the operator 4 - 3
S A M S U N G
F AR A
O PE R AT O R
C ST - SD 2
MODE
RESET
SET
JOG
ON
Shifts position in
7-segment

Fig 4.1 Operator

Reading of the parameter,
ESC key function.
ENTER
Up/Down of the blinking segment.
Forward rotation(UP key) and reverse
rotation(DOWN key) in JOG ON mode