Fig 1.1 Preparation For Operation - OE Max Controls CSDJ Plus User Manual

1 - 4 CSDJ Plus Servo Drive User's Manual
1.2 Preparation for Servo Operation
The block description below is the basic steps before operating the servo drive.
Motor Power and PE Connection
Encoder Cable Connection (CN2)
Parameter Setting and Gain adjustment
AC power, PE Connection
I/O Connection (CN1)
Startup

Fig 1.1 Preparation for Operation

Check the encoder type (SEt-
51), motor type (SEt-52) and
motor capacity (SEt-53) before
the start up.