Fig 2.4 Ac Servo Motor - OE Max Controls CSDJ Plus User Manual

2 - 6 CSDJ Plus Servo Drive User's Manual
2.2 Precautions during Installation
Power voltage is available for 220VAC & 24VDC.
B : for 220V
C : for 24VDC
Electricity remains in the product even if the power has been turned off.
Operate 10 minutes after turning off the power.
Caution
A. Installing the Servo Motor
Installation of the AC servo motor is possible both horizontally and vertically. If the
installation location or its environment is not appropriate, the life span of the motor may be
reduced or may cause unexpected accidents. Install the system according to the procedures
described below.
1) Prior to the Installation.
- The rustproof paint is coated on the shaft end and the surface of the flange. Clean the
paint using the thinner prior to the installation. To prevent the cover from peeling, be
cautious the thinner is not applied to other parts. Be cautious when moving the
motor because it may rust if the surface is scratched. Also, the encoder attached in
the servo motor may be damaged from vibration or shock.
CSDJ-04BX2
CSDJ-04BX2
CSM-04BB1ANT

Fig 2.4 AC Servo Motor