Sensor; A 3.3.3.1 Info About Calibration Tables; A 3.3.3.2 Sensor Number; Sensor Information - MICRO-EPSILON interferoMETER Operating Instructions Manual

Appendix | ASCII Communication with Controller
A 3.3.3

Sensor

A 3.3.3.1 Info about Calibration Tables
SENSORTABLE
->SENSORTABLE
Channel, Position, Sensor name,
1, 0
1, 1
->
All available (learned) sensors are displayed.
A 3.3.3.2 Sensor Number
SENSORHEAD [<number>]
Selects the current sensor from its position in the sensor table, see
A 3.3.3.3

Sensor Information

SENSORINFO
Output of information about the active sensor (name, measuring range and serial number).
->SENSORINFO
Position:
Sensor name:
Measurement range:
Serial number:
Sensor Type:
Sensor Type:
->
A 3.3.3.4

Pilot Laser

PILOTLASER [ON | OFF]
Indicates the current status of the pilot laser, or switches the pilot laser on or off.
A 3.3.3.5

SLED

SLED [ON | OFF]
Indicates the current status of the SLED, or switches the SLED on or off.
IMS 5x00
Measurement range, Serial number
IMP-DS19 2.100 mm,
IMP-TH45 2.100 mm,
0
IMP-DS19
2.100 mm
12345678
Distance
Thickness
12345678
12345678
Chap. A 3.3.3.1.
Page 87