A 3.3 General Commands; A 3.3.1 General; Help; Controller Information - MICRO-EPSILON interferoMETER Operating Instructions Manual

Appendix | ASCII Communication with Controller
A 3.3 General Commands
A 3.3.1 General
A 3.3.1.1

Help

HELP [HELP | <Command>]
Help is displayed for a command. If no command is specified, general help information is displayed.
A 3.3.1.2

Controller Information

GETINFO
Controller data are queried. Output as per example below:
->GETINFO
Name:
Serial:
Option:
Article:
MAC-Address:
Version:
Hardware-rev:
Boot-version:
BuildID:
Timestamp:
- Name: Name of the controller model / controller series
- Serial: Controller serial number
- Option: Controller option number
- Article: Controller article number
- MAC Address: Network adapter address
- Version: Version of the booted software
- Hardware-rev: Used hardware revision
- Boot-version: Version of the boot loader
- BuildID: Identification number of the generated software
A 3.3.1.3

Reply type

ECHO [ON | OFF]
The reply type describes the structure of a command reply.
- ECHO ON: Displays command name and command reply or an error message.
- ECHO OFF: Only displays command reply or an error message.
A 3.3.1.4 Paramter Overview
PRINT
This command outputs a list of all setting parameters and its values.
IMS 5x00
IMC5400
12345678
000
12345678
00-0C-12-01-62-03
001.036.014
02
002.003
4
20191219_103316
Page 84