A 3.3.15 Key Functions; A 3.3.15.1 Multifunction Button; A 3.3.15.2 Signal Selection For Mastering With Multifunction Button; A 3.3.15.3 Key Lock - MICRO-EPSILON interferoMETER Operating Instructions Manual

Appendix | ASCII Communication with Controller

A 3.3.15 Key Functions

A 3.3.15.1 Multifunction Button

KEYFUNC1 [NONE|MASTERSET|MASTERRESET|PILOTLASER|SLED]
Configuring the button for the interval pressed 1 (0 ... 2 s)
- NONE: No function
- MASTERSET: The MASTER SET command is triggered (see command Master) for signals that have been defined by
KEYMASTERSIGNALSELECT.
- MASTERRESET: The MASTER RESET command is executed (set command MASTER) for signals that have been de-
fined by KEYMASTERSIGNALSELECT.
- PILOTLASER: The button is used to switch the pilot laser.
- SLED: The button is used to switch the SLED.
KEYFUNC2 [NONE|MASTERSET|MASTERRESET|PILOTLASER|SLED]
Configuring the button for the interval pressed 2 (2 ... 5 s)
- NONE: No function
- MASTERSET: The MASTER SET command is triggered (see command Master) for signals that have been defined by
KEYMASTERSIGNALSELECT.
- MASTERRESET: The MASTER RESET command is executed (set command MASTER) for signals that have been de-
fined by KEYMASTERSIGNALSELECT.
- PILOTLASER: The button is used to switch the pilot laser.
- SLED: The button is used to switch the SLED.

A 3.3.15.2 Signal Selection for Mastering with Multifunction Button

KEYMASTERSIGNALSELECT [ALL | NONE | <signal> [<signal2> [...]]]
Selection of measuring data signals for the master via the button (see KEYFUNC1 and KEYFUNC2). A list of available sig-
nals is provided by the META_MASTER command. The signals are configured using the MASTERSIGNAL command.

A 3.3.15.3 Key Lock

KEYLOCK [NONE | ACTIVE | (AUTO [<timeout period>])]
Key lock configuration
- NONE: Key is active, no key lock.
- ACTIVE: Key lock is activated immediately after restart.
- AUTO: Key lock is activated only <time> seconds after restart.
<time period> minutes (1 ... 60)
IMS 5x00 Page 105