Appendix | Accessories, Services
Appendix
A 1
Accessories, Services
Mounting adapter
MA5400-10
MA5400-20
Sensor cable (optical fiber)
C5401-x
Drag chain
C5401-x(010)
Vacuum cable
C5400-x/VAC
Vacuum feed through
C5405/VAC/1/CF16
C5405/VAC/1/KF16
Other accessories
SC2471-3/IF2008ETH
SC2471-x/IF2008
SC2471-x/RS422/OE
EC2471-3/OE
IF2001/USB
IF2004/USB
IF2008/ETH
IF2008/PCIE
IF2030/PNET
IMS 5x00
Mounting adapter for IMP-DS19 and IMP-TH45 sensors
Mounting adapter for IMP-TH70 sensors
Standard E2000/APC (controller) and FC/APC plug (sensor),
optical fiber length x = 2 m, 3 m, 5 m or 10 m,
other lengths available on request up to 20 m
Drag chain E2000/APC (controller) and FC/APC plug (sensor)
optical fiber length x = 3 m, 5 m or 10 m,
other lengths available on request up to 20 m
Vacuum cable FC/APC plug
Optical fiber length x = 1 m, 2 m or 5 m,
Vacuum feed through with CF flange
Vacuum feed through with CK flange
Connector cable between IMC5400/5600 and IF2008/ETH, length 3 m
Connector cable between IMC5400/5600 and IF2008/PCIE or IF2004/USB,
length 3 m or 10 m
Interface cable for interface IF2030, length 3 m or 10 m
Encoder cable, length 3 m, one-sided open ends
Converter RS422 to USB, type IF2001/USB, useable for cable SC2471-x/RS422/OE,
inclusive driver,
connections: 1× female connector 10-pin (cable clamp) type Würth 691361100010,
1x female connector 6-pin (cable clamp) type Würth 691361100006
4-channel RS422/USB converter for one to four controllers with RS422 interface, additionally
with trigger input, suitable for SC2471-x/IF2008 cable, data output via USB interface,
a 24 VDC/2 A power supply is required for operation (not included)
8-channel RS422 to Ethernet converter with industrial M12 plug/socket for connecting up to
8 controllers with RS422 interface; additionally 4 programmable switching inputs and out-
puts that can be operated via TTL and HTL logic, suitable for SC2471-x/IF2008ETH cable,
permissible ambient temperature +5 to +50 °C; protection class IP65
Interface card IF2008/PCIE to capture four digital sensor signals synchronously and two en-
coders. In conjunction with IF2008E a total of six digital signals, two encoders, two analog
signals and eight I/O signals can be captured synchronously
Interface module for PROFINET connection of Micro-Epsilon sensors to RS422/RS485 in-
terface, suitable for SC2471-x/RS422/OE cable, 1-channel system with top-hat rail housing,
incl. GSDML file for software integration into the PLC, certified according to PNIO V2.33
Page 79
Need help?
Do you have a question about the interferoMETER and is the answer not in the manual?
Questions and answers