Access Authorization - MICRO-EPSILON interferoMETER Operating Instructions Manual

Advanced Settings
7.6.6

Access Authorization

Assigning passwords prevents unauthorized changes to the controller settings. The password protection is not activated
in the delivery condition. The controller works on the Professional level. After the controller has been configured, you
should enable password protection. The standard password for the Professional level is "000".
i
A software update will not change the default password or a user-defined password. The Professional password is
independent from Setup and is thus not loaded or stored with Setup.
The following functions are accessible for the user:
Password required
View settings
Change settings, change password
View readings, FFT signals
Scale graphs
Multifunction button
Restore factory settings
Fig. 69 Permissions within the user hierarchy
The user management enables to define a user-specific password in Professional mode.
Password Value
User level when User /
restarting Professional
Grey shaded fields require a selection.
IMS5x00
User Professional
no yes
yes yes
no yes
yes yes
yes yes
no yes
no yes
Enter the default password "000" or a
user-defined password in the Password
field and click on Login to confirm.
Fig. 70 Changing to professional level
All passwords are case-sensitive. Numbers are allowed. Special charac-
ters are not permitted.
Defines the user level that is enabled when the sensor starts the next
time. MICRO-EPSILON recommends selecting Professional level here.
Value
Fields with dark border require entry of a value.
Page 74