Signal Routing And Scaling; Figure 6: Signal Routing - Moog RKP-D User Manual

6 Signal routing and scaling

6 Signal routing and scaling
The following figure shows the routing of the command values (demand values) and actual values. This con-
cept applies on the position control as well as on the pressure control.
pressure control
position control
actual value path
sensor values
Description of the command value path:
Chapter "6.2 Command value path", page 39
Description of the actual value path:
Chapter "6.3 Actual value path", page 46
© Moog GmbH
command value path
setpoint
hold setpoint
demand value
actual value
interface
definition

Figure 6: Signal routing

USER MANUAL Firmware RKP-D (B99224-DV007-CE400; Version 1.1, 09/08)
analog input
demand value
generator
controller
pilot valve
device mode
status word
33