1 General information
About this manual
1 General information
1.1 About this manual
This document describes all accessible parameters used by our radial piston pumps with CANopen interface.
Most parameters follow the DSP 408.
The manual is part of the complete documentation available for the radial piston pump.
Chapter "1.3 Further documentation for the device", page 2
This document is not a replacement for the CANopen standards as listed in the references.
Chapter "1.4 References", page 3
This manual was prepared with great care and the contents reflect the authors' best knowledge. However, the
possibility of error remains and improvements are possible.
Please feel free to submit any comments regarding errors or incomplete information to us.
1.1.1 Reservation of changes and validity
The information contained in this manual is valid at the time of this version's release. See footer for version
number and release date of this manual.
We reserve the right to make changes to this manual at any time without specified reasons.
1.1.2 Completeness
This manual is complete only when used in conjunction with the product related hardware and software docu-
mentation required for the relevant application.
1.1.3 Place of storage
This manual and all other associated documentation for hardware and software must always be kept in a loca-
tion where they will be readily accessible and close to the RKP-D or the equipment in which they are installed.
1.1.4 Warranty and liability
This manual only describes the functionality and influence of the CANopen parameters. The described soft-
ware functionality can be used in various pump models which can be implemented in a vast range of applica-
tions. Hence it is not possible to assume liability for the influence of the parameters. Please refer to the safety
instructions and remarks in the related operating instructions.
© Moog GmbH
USER MANUAL Firmware RKP-D (B99224-DV007-CE400; Version 1.1, 09/08)
1
Need help?
Do you have a question about the RKP-D and is the answer not in the manual?