Basic>Adsl Quick Setup - NetComm NB9WMAXX User Manual

Basic>ADSL Quick Setup
The NB9WMAXX web configuration page can be opened in a Web Browser window of a computer attached to
the device by entering the Web address http://192.168.1.1. Enter User ID: admin and password: admin.
The 'ADSL Quick Setup' page will then be displayed when the device is first started, or if you have deleted
your WAN connection settings or reset the NB9WMAXX to factory defaults. The 'ADSL Quick Setup' screen
appears as follows:
Field
User Id
Password
Save & Reboot
Type in the User ID and Password and click on Save/Reboot, close the browser and wait several minutes. Then re-
open browser window and log into NB9WMAXX again following steps above. You will then see the Basic>Home
page indicating your ADSL service is connected. Proceed to configure VoIP and Wireless, if required.
NOTES:
* PPPoE (Point to Point Protocol over Ethernet) is the standard connection method for Australian ISPs.
** ADSL is 'UP': this means the ADSL Synch Light must be steady green

Description
The PPPoE username issued by your ISP (e.g. user@isp.com.au)
The PPPoE password issued by your ISP
This button saves your settings, reboots the NB9WMAXX and connects to the Internet. Once
completed you will be returned to the 'Basic > Home' page
NB9WMAXX ADSL+ VoIP Router
YML89 Rev1