Table of Contents
Advertisement
Unit Computer and System Memory
• Socketless PowerPC IBM PPC405Ex 600 MHz
• Used for switch provisioning and diagnostics
• 512 MBytes DDR2 RAM 200 MHz
• 64 MBytes NOR Flash
• 1 GByte NAND Flash
IPMI
• Renesas H8S2166 Microcontroller
• PICMG 2.9 / IPMI 1.5 compliant
• Dual Image Support
• 512 kByte Flash (Boot Image)
• 64 kByte EEPROM (FRU)
• Board Voltage, current monitoring via internal ADC
• Board Temperature monitoring via I²C enabled sensors
Power Supply
• 5V and 3.3V only board, no 12V or -12V required
• IPMB_PWR or 5V used for 3.3V PM (generated by LDO)
• Hot Swap support
• 5V and 3V3 V stabilization
• Point of Load Converters for chip core voltages
Miscellaneous
• Management connection to Unit Computer via RS232 front RJ45
• Management connection to Unit Computer using front 10/100/1000Base-T management port
• Management connection to Unit computer via RS232 at J4
• FRU data storage (serial ID) in Unit Computer NOR Flash
• Board support package includes WindRiver Linux, device drivers, protocol stacks bootloader and power
on self tests
• Metalwork compliant to PICMG® 2.0 6U/4HP (233.35 mm by 160 mm) / (20.32 mm typ.)
• Optionally NV Memories can be hardware protected
Note...
SFP or SFP+ modules are not included with the CP6930. An appplication note
with a list of modules successfully operated in the CP6930 is available upon
request.
3
Introduction
CP6930 User Guide
www.kontron.com
Advertisement
Table of Contents
