General Compliances; Hot Swap Capability; Optional Accessories; Rear And Front Io Modules - Kontron CP6930 User Manual

1.1.2

General compliances

The Board is compatible to the following standards:
• PICMG® 2.0 R3.0 CompactPCI® Specification, as amended by ERN 2.0-3.0-002
• PICMG® 2.1 R2.0 CompactPCI® Hot Swap Specification
• PICMG® 2.5 R1.0 CompactPCI® Computing Telephony Specification
• PICMG® 2.9 R1.0 CompactPCI® System Management Specification
• PICMG® 2.10 R1.0 Keying of CompactPCI® System Management Specification
• PICMG® 2.16 R1.0 Sep. 5, 2005 Packet Switching Backplane Specification
• Intelligent Platform Management Interface Specification V1.5
• IEEE 802.3, 2000
• IEEE 802.3ae 2002
• Small Form-factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA), Sept. 14th, 2000
• ANSI/Vita 31.1
• ANSI/Vita 47-2005
1.1.3

Hot Swap Capability

The board supports Full Hot Swap capability as required by PICMG 2.1 R2.0. It can be removed or inserted in a
powered slot. Please refer to the PICMG 2.1 R2.0 specification for additional details.

1.2 Optional Accessories

1.2.1 Rear and Front IO Modules

The IO modules provide additional GbE switch ports and out-of-band management access via RS232. With an
appropriate backplane, all switch ports of the CP6930 that connect to the backplane can be accessed using
the module.
The following modules supporting the CP6930 are available:
Table 1-1: CP6930 IO Modules
Front/
Module
Rear
Rear CP-RIO6-923
Rear CP-RIO6-923
Front CP-RIO6-923-F12
Front CP-RIO6-923-F
Front CP-RIO6-923-F-8M12
Number of
Order Number
Ports
36309 12
36310 24
1036-3618 12
1031-8530 24
1035-9343 8
4
Module
Type of Ports
width
GbE RJ45 1 slot
GbE RJ45 2 slots
GbE RJ45 1 slot
GbE RJ45 2 slots
FE M12 (d coded) 1 slot
www.kontron.com
Introduction
Serial
Port
Yes
Yes
No
No
No
CP6930 User Guide