Updating Ipmi; Updating The 10G Phy Firmware - Kontron CP6930 User Manual

4.5.2 Updating IPMI

Updating the IPMI firmware is done with the "copy" command. In case that the update procedure fails or the
update image is corrupted, the PM will be able to restart by means of its rollback functionality.
The IPMI firmware package file is provided in HPM.1 format and is stored in the data/update directory of the
release directory tree.
(Ethernet Fabric) #copy tftp://192.168.50.5/cp6930-ipmi-GA-2.00.hpm nvram:ipmi
Flashing a new IPMI firmware will disable the IPMI Controller for some minutes.
Are you sure to update the IPMI firmware? (y/n)y
...
(Ethernet Fabric) #

4.5.3 Updating the 10G PHY Firmware

Updating the 10G PHY firmware is done with the "copy" command.
The update package for the 10G PHY comes as a tar-file and is stored in the data/update path of the release
directory tree.
(Ethernet Fabric)
nvram:phy-fw-10g
(Ethernet Fabric) #
#copy tftp://192.168.50.5/cp6930-8727-firmware.GA-2.00.tar
66
Software Description
CP6930 User Guide
www.kontron.com