Table of Contents
Advertisement
When performing a firmware update, the software package is loaded from a remote TFTP server. A software
update of the CP6930 CPCI Switch is done by performing the following steps:
1. Prepare network access of the board
2. Log in to the privileged exec mode of the CLI of the board
3. Copy system image into the system 1 of the flash memory.
(Ethernet Fabric) #copy tftp://192.168.50.154/CP6930-update-GA-2.01.pkg image1
(Ethernet Fabric) #
4. Check availability of valid boot image in image1 using the command 'show bootvar'
(Ethernet Fabric) #show bootvar
Image Descriptions
image1 : Product ID
Product Variant : 0
U-Boot Release
Manufacturer ID : 15000
Build-Date
image2 : Product ID
Product Variant : 0
U-Boot Release
Manufacturer ID : 15000
Build-Date
Images currently available on Flash
active (image1)
---------------- ----------------
GA 2.01
Restart the board
(Ethernet Fabric) #reload
5. In case of problems with booting the sysetm, last working image2 will automatically be copied to
image1. This procedure restores normal system behaviour. Configuration settings made with image1
are lost and shoud be saved by copying image1 to image 2 before.
6. It is recommended to copy image 1 to image 2 to have a fully redundant system
(Ethernet Fabric) #copy image1 image2
Copying image1 to image2
(Ethernet Fabric) #
The image will be copied including the configuration settings currently stored for image 1
: 1701
: GA 2.01
: 20100520030324
: 1701
: BETA 1.00
: 20100119185922
backup (image2)
BETA 1.00
65
Software Description
CP6930 User Guide
www.kontron.com
Advertisement
Table of Contents
