Ir Remote Keypad - Christie Boxer 4K30 User Manual

ID Component
D Keypad interface
E Christie TAP
F Front IR
G Projection lens
H Adjustable feet
I Service compartment
J Tool box
K Rear IR
L LED status indicator
M Shutter LED status
indicator
N Lamp door
O AC lock
P AC Input 2: limited power
Q AC Input 1: full power
R Power cord: limited power
S Power cord: full power

IR remote keypad

The IR remote keypad controls the projector by way of wireless communications from a battery-
powered infrared (IR) transmitter. To use the IR remote, direct the keypad toward the projector's
front or rear IR sensor and press a function key. One of the two IR sensors on the projector will
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
Description
Controls the projector.
Enables Android devices to communicate with the projector using near field
communication.
Receives transmissions from the IR remote.
A variety of lenses can be used with the projector. Available lenses are listed
in accessories.
Raise or lower these feet when positioning the projector to make sure it is
level on all sides so the displayed image appears rectangular without any
keystone.
Access to fold mirror, optical zoom/focus, and DMD convergence
adjustments.
Provides tools for Christie qualified technicians.
Receives transmissions from the IR remote.
Indicates lamp, and power status.
Indicates shutter status.
Access to lamp compartment.
Locks Input 1 power cord.
Use this IEC 320-C14 inlet to connect to an appropriately rated power cord
(component R) provided for your region. For use in limited power mode.
Use this IEC 309 inlet to connect to an appropriately rated power cord
(component S) provided for your region. For use in full power mode.
Connects the provided power cord appropriately rated for your region to AC
Input 2 for limited power mode.
Connects the provided power cord appropriately rated for your region to AC
Input 1 for full power mode.
Introduction
12