Power Connection - Christie Boxer 4K30 User Manual

• Ambient temperature (operating) 5 to 40°C (41 to 104°F)
• Humidity (non-condensing) 10 to 80%
• Operating altitude: to be confirmed

Power connection

The projector uses an innovative dual AC inlet power system that offers two power modes. To
operate at full brightness (six lamps), power the projector using AC Input 1 if the appropriate high
power source is available. To operate in limited power mode (single lamp), power the projector
using standard lower power sources using AC Input 2. A different power cord is provided for each
power source. A 30A rated wall breaker is required at the installation when using Input 1. A 15A
rated wall breaker is required at the installation when using Input 2.
For more details, see
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
Power requirements on page 37.
Introduction
10