Home Monitoring & Control System
Adjust Camera Settings
From the Control Panel window click the large edit button underneath the camera
, to adjust the settings for the device selected. The Camera setting
window is displayed (Wired and Wireless cameras operate in the same manner):
Rename the camera.
Adjust the time before the
camera rearms itself after the
motion sensor was triggered.
Select the length of the video clip
that will be recorded if the
camera is armed and configured
for video capture.
Adjust as desired to improve
The result of the Quality
adjustment is not visible in the
live camera view, only when you
have taken a picture. The Quality
setting does not affect video
Select On or Off to display the
Camera Name, Time, and Date
Adjust the settings desired and click Set. The settings you selected are uploaded to the
Click Default to reset to factory programmed settings or Cancel to ignore any changes.
Status Icon Description
The camera is functioning normally.
No communication is possible. The Gateway cannot reach the camera.
Check the connections. If fine, try re-discovering the camera or repositioning
the wireless camera.
Working with the MHM Program
MHM User Guide