Home Monitoring & Control System
8
Do not click Next and do not exit the installation sequence yet. Instead, carefully
remove the back cover from the USB Gateway before continuing with the software
installation.
9
Plug the USB cable from the USB Gateway to the USB port on your computer. The
USB port on your computer is usually marked with the USB symbol.
The USB plug inserts into
the USB port on the
computer only one way. DO
NOT TRY TO FORCE THE
PLUG INTO THE PORT if it
doesn't fit. Instead, flip it
over and try again.
USB Symbol
4
Power
Video
Status
Data
USB Controller
Computer
Installation
MHM User Guide