Working with the MHM Program
To disarm all sensors and cameras, click
"System Not Armed."
Status Icon Description
The sensor is functioning normally.
No data is available. The MHM program hasn't communicated with the sensor yet.
Wait for some time and if still not connected, try re-discovering the sensor. The
wait period may be up to 20 minutes for Discovery.
No communication is possible. The MHM program cannot reach the sensor.
Check the batteries are powered. If so, try re-discovering the sensor or
When the Door/Window Sensor is configured in
event, it sends an event marker to the Archives. Refer to
Home Monitoring & Control System
. The Status line updates to state:
Setup, is armed and detects an
for further details.
MHM User Guide