Introduction
Congratulations on your purchase of the Motorola Home Monitor & Control USB Gateway.
The USB Gateway enables you to operate the various cameras and sensors available with
the Motorola Home Monitor & Control System. Devices can be armed to store events,
images, and video clips right to your hard drive for archiving and viewing. You can e-mail
notifications of events occurring to whomever you designate. This device is just one of the
many automation products that allow advanced monitoring of your home or office offered by
the Motorola Home Monitor & Control System.
This User Guide describes how to set up, use, and troubleshoot your USB Gateway.
Requirements
Windows computer running Windows Me
Intel Pentium 2 or equivalent CPU or faster
2X CD-ROM drive
128MB of RAM
45MB of hard drive space recommended for install
500MB for archives (maximum)
USB Support
Administrative Rights on Windows 2000 and Windows XP
How It Works
The Motorola Home Monitor (MHM) program is the heart of your Motorola Home Monitor &
Control System. You manage the various cameras and sensors with the MHM program. For
example, if you would like to see what your dog is barking at while at your desk, log in to
the MHM program to see your dog with your wireless camera.
The USB Gateway works with the MHM program and provides access to all of the devices
in your network allowing you to manipulate the data that the devices send and receive.
Home Monitoring & Control System
®
®
, Windows
2000, or Windows XP
1
™
MHM User Guide