Quick Start Guide Home Monitoring & Control System HMGW1070 USB Gateway...
You can manage your system on your home PC. With a broadband Internet connection, you can specify e-mail and cell phone, as either a text message or as text + image, depending on your provider, for delivery of notifications based on monitored events.
2X CD-ROM drive • USB port • 128 MB RAM running Windows Me ® , Windows ® 2000, or Windows XP ™ for Home or Professional • 45 MB of hard drive space recommended for installation; 500 MB (maximum) for archives...
Plug the AC adapter into the Power port on the USB Gateway and into an AC wall outlet. This powers on your USB Gateway. Connect the USB cable on the Gateway to the USB port on your computer. Windows automatically installs the required drivers.
If you encounter a problem setting up your Home Monitoring & Control System, try the following: • Verify that you followed the steps in the order specified. Be sure you plugged in all components to AC power. If necessary, try again.
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Copyright © 2004 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Motorola, Inc.
Visit our website at: http://www.motorola.com/homemonitoring 520623-001 11/04 MGBI...