Table of Contents
Advertisement
Home Monitoring & Control System
Door/Window Sensor Control
The Door/Window Sensor is referred to within the MHM program as the Contact Sensor.
1
From the Control Panel window in the Edit column, click
selected device. The Contact Sensor setting window is displayed:
Item
Sensor Name
Power Mode
2
Adjust the settings desired and click Set. The settings you selected will be uploaded to
the device.
Click Default to reset to factory programmed settings or Cancel to ignore any changes.
Arming/Disarming
Devices are triggered awake by certain events when armed. For example, if configured, a
door opening triggers the sensor to record the event.
To arm all sensors and cameras, click
"System Armed."
To Arm after a selected period (giving you time to
leave the house, for example), select a time from
the Schedule drop-down menu and then click Arm.
Description
Rename the sensor.
Select Normal or Save to
change the power setting.
Selecting Save changes the
sensor to standby mode to
extend battery life, but if
sensor is triggered, it sends
an alert if configured in
Setup.
32
Working with the MHM Program
to adjust the settings of the
Event
. The Status line updates to state:
MHM User Guide
Advertisement
Table of Contents
