Motorola Home Monitoring & Control System
Congratulations on your purchase of the USB Gateway, the
primary component of the Motorola Home Monitoring & Control
System. This guide describes how to set up the USB Gateway.
The Motorola Home Monitoring & Control System helps keep
you informed day and night, rain or shine. The complete product
line offers many advanced monitoring devices, including:
Wired and wireless video cameras
Wireless temperature sensors
Wireless water sensors
Wireless door/window sensors
You can manage your system on your home PC. With a
broadband Internet connection, you can specify e-mail and cell
phone, as either a text message or as text + image (depending
on your provider), for delivery of notifications based on
For more information about Motorola Home Monitoring &
Control products, go to
To register your product, go to
This USB Gateway package includes:
Motorola Home Monitor software to manage cameras and
sensors using your computer
The USB Gateway to connect to your computer to locally
manage your Motorola Home Monitoring & Control System
through a wireless link
A 12V power adapter
Computer System Requirements
PC with Intel Pentium
II or later processor, 2X CD-ROM drive,
USB port, and 128 MB RAM running Windows Me
2000, or Windows XP
45 MB of hard drive space recommended for installation; 500
MB (maximum) for archives
for Home or Professional
Installing the Software and USB Gateway
Do not connect your USB Gateway to your computer until the
Installation Wizard instructs you to do so.
Insert the enclosed Motorola Home Monitoring & Control
System CD in the CD-ROM drive. The Motorola Home
Monitor Installation Wizard is displayed.
If the application does not appear or autorun, right-click the
Start button and select Explore.
Select your CD-ROM and double-click to open.
Double-click Launch.exe to start the application.
Click Next. The Choose Destination Location window is
Click Next to accept the default destination folder or click
Browse to select a new one. After you click Next, the Select
Program Folder window is displayed.
Accept the default folder or choose a new one. Click Next.
The file installation begins. After a few moments, the Install
Motorola Home Monitor Hardware and Driver window is
Remove the back cover from your
Pull back from the top and
then down. The cover will
separate from the unit.
Plug the AC adapter into the Power port on the USB
Gateway and into an AC wall outlet. This powers on your
Connect the USB cable on the Gateway to the USB port on your
computer. Windows automatically installs the required drivers.
USB port on
PC (step 7)
If desired, replace the USB Gateway back cover.
Once the driver installation is complete, click Next. The
Software installation was successful window is displayed. Be
sure the checkbox "Launch Motorola Home Monitor" is selected.
Click Finish. The Motorola Setup Wizard is displayed. Follow
the on-screen instructions for installing The Motorola Home