Device Discovery Wizard - Motorola HMUG1080 User Manual

Home Monitoring & Control System

Device Discovery Wizard

1 The introductory Motorola setup wizard window is displayed.
2 Click Next. Read about connecting devices. You can now thread all the cables
(including a Wired Camera, if you have it) through the bottom of the back cover of the
Gateway and replace it. If you have a Wired Camera, install it now. Click Next.
The Introduction to Detecting Devices window is displayed.
3 Using the diagram, locate and press the Discovery buttons on your wireless devices
with your Discovery tool.
4 Click Next. The Device Discovery window is displayed.
Your cameras and sensors operate with your MHM program only after they are
discovered. The MHM program "listens" and accepts a camera or sensor when the
Discovery button is briefly pressed on each device. The Device Name is displayed on
the Discovery window after the MHM program accepts the device.
The devices discovered appear in the Discovery Name list. If they do not appear, try
pressing the Discovery buttons of the devices again. You can also refer to Installation
Guide that came with your devices for additional information.
Once all of the devices display in the Device Name list, click Next. The WiFi information
window is displayed.
Discovery
Button
12
Installation
Discovery
Button
Discovery Tool
MHM User Guide