Comtech EF Data HPOD Installation And Operation Manual page 64

System Account Access Information

Read Only / Read/Write / Admin Names and Passwords – These defaults, set at the
factory, may be changed as needed:
Read Only Name / Password
Read/Write Name / Password
Admin Name / Password

SMTP Server – Set the mail server IP address from where you want to send e-mail, in the
form 0.0.0.0.

SMTP Domain Name / Destination – The Administrator must assign the SMTP Domain
Name and Destination.
Click [Submit Access] to save these settings or click [Reset] to revert to the previously assigned
System Account Access Information settings.
Webpage Timeout
This is the maximum amount of time that the computer can remain idle before the session logs
out. After the timeout occurs, you must log in to the Web Server Interface again.
Use the drop-down list to select 8 Hours or 5 Minutes (default), and then click [Change] to save.
Ethernet-Based Remote Product Management
Field
monitor / 1234
opcenter / 1234
comtech / comtech
4–13
HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
Factory Default
Name / Password Characters
10
Revision 9
Maximum
Format
alphanumeric
MN/HPOD.IOM