Table of Contents
Advertisement
D. Use Windows Command-line to create the temporary folder.
First, click [Start] on the Windows taskbar, and then click the 'Run...' icon (or,
depending on Windows OS versions prior to Windows 95, click the 'MS-DOS
Prompt' icon from the Main Menu).
Next, open a Command-line window...
o For Windows 95 or Windows 98 – Type "command".
o For any Windows OS versions later than Windows 98 – Type "cmd" or
o Alternately, from [Start], select All Programs > Accessories > Command
o Finally, from the Command-line 'c:\>' prompt, type "mkdir temp" or "md
There should now be a 'temp' folder created and available for placement of the
firmware file download.
Updating Firmware
"command".
Prompt.
temp" (mkdir and md stand for make directory), and then click [OK].
HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
3–4
Revision 9
MN/HPOD.IOM
Advertisement
Table of Contents
