Table of Contents
Advertisement
A.1
Overview
Several kits are available from Comtech to mount and install HPOD 1:1 or 1:2 Redundancy Systems. These kits are tailored to the
operational frequency of the system. The figures and tables provided in the subsections that follow provide examples of these currently
available kits.
The illustrations provided in this appendix are intended as reference examples only. The dimensions shown in
these example figures are subject to change and may not reflect your installed configuration.
Once all system kit components have been assembled and all interconnecting RF and M&C cables have been installed, see Appendix B.
1:1 AND 1:2 REDUNDANCY OPERATION for further information about configuring, operating, and troubleshooting your HPOD 1:1
or 1:2 Redundancy System.
Appendix A
Appendix A. REDUNDANCY SYSTEM
HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
ASSEMBLY KITS
A–1
Revision 9
MN/HPOD.IOM
Advertisement
Table of Contents
Need help?
Do you have a question about the HPOD and is the answer not in the manual?
Questions and answers