Redundancy Operation Using The Sspa (Hpod) Web Server Interface; Web Server Interface Overview - Comtech EF Data HPOD Installation And Operation Manual

B.2

Redundancy Operation Using the SSPA (HPOD) Web Server Interface

See Chapter 4. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT for
detailed information about using the Web Server interface.
To proceed with Ethernet-based Remote Product Management, assumptions
are made that:

The HPOD is operating with the latest version firmware files.

The HPOD is connected to a user-supplied Windows-based PC as follows:

The HPOD's IP Address has been noted using the HPOD serial or Telnet
remote 'FRW' query or using the Web Server Interface 'Admin | Access'
page.
B.2.1 Web Server Interface Overview
To use the SSOPA (HPOD) Web Server Interface:

Open a compatible Web browser.

Enter the HPOD IP Address into the browser Address field (default is http://192.168.1.4)

Enter a valid user name / password (default is comtech / comtech). The SSPA Web
Server Interface 'Home' page appears upon successful login:
Appendix B
The User PC Ethernet port is connected to the HPOD 'J6 | COM1' port
o
with a 190-pin to RJ-45 adapter cable.
The User PC is running a terminal emulation program (for operation of
o
the HPOD Telnet remote control interface) and a compatible web
browser (for operation of the Web Server Interface).
HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
B–4
Revision 9
MN/HPOD.IOM