Table of Contents
Advertisement
Command
Parameter
Number of
(Instruction
Type
Arguments
& Qualifier)
Retrieve
N/A
2 bytes,
Number of
numeric,
unread
00 to 99
Stored
Alarms
Terminal
N/A
1 byte,
Status
value of 0,1
change
Software
IMG=
1 byte
Image
IP Address
IPA=
18 bytes
Serial-Based Remote Product Management
Description of Arguments
Query only.
Returns the number of stored events that remain unread in the
alarm log, in the form xx, where:
Xx = A maximum of 99 events may be stored in the alarm log.
Example:
<1/TNA? 'cr'
>0001/TNA=14'cr''lf'
Query only.
Indicates if there has been a change in the terminal status since
the last time the command was given. A value of 0 indicates no
status change, and a value of 1 indicates there has been a
terminal status change.
Example:
<1/TSC?'cr'
>0001/TSC=0'cr''lf'
Command or Query.
Current Active software image, in the form x, where:
1=Bulk Image # 1 currently active
2=Bulk Image # 2 currently active
Example: IMG=1 (which is Image #1 active)
Command or Query.
Set the IP address and network prefix for the 10/100 BaseT
Ethernet management port, in the form aaa.bbb.ccc.ddd.yy
where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
yy = 08-30
Default Value: 192.168.001.004.24
Example: 192.168.001.004.24
5–23
HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
Query
Response to
(Instruction &
Command
Qualifier)
N/A
TNA?
N/A
TSC?
IMG=
IMG?
IMG?
IMG*
IMG#
IPA=
IPA?
IPA?
IPA*
IPA#
Revision 9
Response to
Query
TNA=xx
(See
Description of
Arguments)
TSC=x
(See
Description of
Arguments)
IMG=x
(See
Description of
Arguments)
IPA=
aaa.bbb.ccc.d
dd.yy (see
Description of
Arguments)
MN/HPOD.IOM
Advertisement
Table of Contents
