Comtech EF Data HPOD Installation And Operation Manual page 97

Command
Parameter Number of
(Instruction
Type Arguments
& Qualifier)
Gateway IPG= 15 bytes
Address
Unit MAC N/A 17 bytes
Address
Time TPE 1 byte,
Protocol
value of 0,1
Enable
Time TPS 15 bytes
Protocol
Server
Serial-Based Remote Product Management
Description of Arguments
Command or Query.
Set the Gateway IP address for the 10/100 Base Tx Ethernet
management port, in the form aaa.bbb.ccc.ddd, where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
Default Value: 192.168.001.005
Example: IPG = 192.168.001.005
Query only.
Reports, in hexadecimal, the MAC address of the unit.
Example: MAC=00-06-B0-00-D2-A7
Command or Query.
Enables or Disables the Time Protocol, in the form x, where:
0 = Time protocol disabled
1 = Time protocol enabled
Example: TPE=1 (Time protocol enabled)
Command or Query.
Sets or returns the Time Server IP address for the unit Tx
Ethernet management port, in the form aaa.bbb.ccc.ddd, where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
Default Value: 255.255.255.255
Example: IPG = 192.168.001.005
5–24
HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
Query
Response to
(Instruction &
Command
Qualifier)
IPG= IPG?
IPG?
IPG*
MAC= MAC?
MAC*
TPE= TPE?
TPE?
TPS= TPS?
TPS?
Revision 9
Response to
Query
IPG =
aaa.bbb.ccc.d
dd
(see
Description of
Arguments)
MAC=
xx-xx-xx-xx-
xx-xx
(See
Description of
Arguments)
TPE=x
(See
Description of
Arguments)
TPS=
aaa.bbb.ccc.d
dd
(see
Description of
Arguments)
MN/HPOD.IOM