General Description; Dmemory Channel Contents - Icom IC-V3500 Advanced Manual

MEMORY OPERATION
3�

General description

The Memory mode enables you to quickly select
often-used frequencies, modes, and other parameters�
While operating in the Memory mode, you can
temporarily change the operating frequency, mode,
and so on without overwriting the Memory channel
contents�
Group Memory
channel
000 to 199 000 to 199
1A/1B,
2A/2B, and
Scan edge
3A/3B
Call
C
channel

DMemory channel contents

• Operating frequency
• Operating mode
• Tuning step
• Transmit output power
• TX Inhibit function setting (p. 8-3)
• Duplex direction and offset
• Subaudible tone frequency, tone squelch frequency,
or DTCS code with polarity
• Channel name
• Channel Name Display mode setting (p. 3-8)
• Skip setting*
In addition, a total of 10 Memory Banks (A to J) are
selectable for use by groups�
* Except for Scan edge channels�
Descriptions
Regular Memory channels.
Up to 100 channels can be
separately saved in the 10
Memory Banks�
The upper and lower
frequencies for the
scanning range (3 pairs)�
Call channel for the FM
band�
NOTE: Memory content may be accidentally
cleared by static electricity, electric transients,
and other causes. In addition, it may be cleared
by a malfunction or during repairs� Therefore, we
recommend that you backup the Memory channel
contents or save it onto a PC.
L The CS-V3500 programming software can also be
used to backup your Memory channel contents� See its
instruction manual for details�
3-2