Icom IC-V3500 Advanced Manual page 68

SET MODES
8.
Set mode items
Channel Skip setting
Turns the Skip function ON or OFF�
• OF: Turns OFF the function�
• ON: The selected Memory channel will be a Skip
channel and skipped during a scan�
L This item is displayed only when the Set mode is
accessed in the Memory mode�
L This function can be independently set for each Memory
channel�
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO
S ET TONE M/CALL
MONI LOW
Bank setting
(Default: --- (No Memory Bank is selected))
Assigns the desired Memory channels and Scan
Edge channels to the Memory Bank for easy Memory
management�
A total of 10 Memory Banks (A to J) are selectable�
L This item is displayed only when the Set mode is
accessed in the Memory mode�
L See page 3-11 for details�
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
Bank Link function
Turns the Bank Link function ON or OFF�
• OF: The selected Memory Bank is not linked�
• ON: The selected Memory Bank is linked and
becomes the target of the Bank Link scan�
L This item is displayed only when the Set mode is
accessed in the Memory mode�
PRIO AO
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
• Setting the bank link
1� Rotate [DIAL] to select "ON�"
PRIO AO
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
2� Push [SET LOCK] to select the desired bank�
PRIO AO
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
L Push [MONI ANM PA] to select the previous bank�
L When Bank A is displayed, push [MONI ANM PA] to
select the item of step 1�
When Bank J is displayed, push [SET LOCK] to
select the next Initial Set mode item�
(Default: OF)
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO
V/MHz S ET TONE M/CALL
MONI LOW
DIGITAL PRIO AO BUSY
DUP T-SCAN PRIO SCAN
LOW TONE M/CALL V/MHz
(Default: OF)
PRIO AO
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
3� Rotate [DIAL] to select "ON�"
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
• The selected Bank is linked�
4� Repeat steps 2 and 3 until all desired banks are
linked�
Wide/Narrow
Sets both the transmit and receive passband width to
wide or narrow�
V/MHz
L This function can be independently set for each Memory
channel, Call channel, and VFO�
Weather alert
For the USA version, an NOAA broadcast station
transmits a Weather Alert tone before any important
weather information�
• OF: The Weather Alert tone is not detected�
• ON: The previously selected Weather channel is
checked every 5 seconds while operating�
When the alert is detected, a beep sounds,
and "AL�T" and the Weather channel are
alternately displayed�
L This item is displayed in only the USA version�
L See page 9-2 for details�
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
MIC gain
Sets the microphone sensitivity to HI (High) or LO
(Low) to suit your preference�
When "HI" is selected, the microphone will be more
sensitive to your voice�
8-4
PRIO AO
(Default: W (Wide))
AO
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
(Default: Depending on the version)
AO
MUTE
NAR
MID
LOW
LOCK ANM
S ET
MONI
(Default: OF)
DIGITAL PRIO AO BUSY