Icom IC-V3500 Advanced Manual page 50

PRIORITY WATCH
5.
VFO frequency and a Memory Bank scan
Using the HM-133V microphone
1 Set the receive frequency
2 Push [MR/CALL] to select the Memory mode
• " " and the Memory Channel number are displayed
3 Push [BANK/OPTION] to select the Memory Bank
mode
• " " and the bank letter blink
L The bank name is displayed, if set
4 Push [▲] or [▼] to select any bank.
L Banks that contain no Memory channels are skipped
5 Push [CLR A MW] to exit the Memory Bank mode
• " " and the bank letter are displayed
6 Push [SCAN 2 T-SCAN] to start scanning
• The frequency decimal point and "
7 Push [PRIO 3 PTT-M] to start the Priority watch
• "PRIO" is displayed
8 Push [PRIO 3 PTT-M] to cancel the watch
• "PRIO" disappears
Example: Watching a Bank scan while receiving in
Set the receive frequency
MUTE
NAR
MID
LOW
LOCK
S ET
Push
MUTE
NAR
MID
LOW
LOCK
" blink S ET
Push
MUTE
NAR
MID
LOW
Push
MUTE
NAR
MID
LOW
Push
MUTE
NAR
MID
LOW
LOCK
S ET
Push
MUTE
NAR
MID
LOW
LOCK
S ET
Push
MUTE
NAR
MID
LOW
LOCK
S ET
The Priority watch searches for a signal on the
scanned Memory channels in the selected bank every
5 seconds
5-8
the VFO mode.
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
to select the Memory mode
DIGITAL PRIO AO BUSY
"
number are displayed
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
to enter the Memory Bank mode
DIGITAL PRIO AO BUSY
or to select any bank (Example: Bank A)
DIGITAL PRIO AO BUSY
to exit the Memory Bank mode
DIGITAL PRIO AO BUSY
"
displayed
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/ MHz
to start scanning
DIGITAL PRIO AO BUSY
"" and "
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/MHz
to start the Priority watch
PRIO DIGITAL AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/ MHz
" and the Memory Channel
" and the bank letter are
" blink
PRIO DIGITAL AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/MHz
"PRIO" is displayed