Using The Option Set Mode; Option Set Mode Items - Icom IC-V3500 Advanced Manual

SET MODES
8.

Using the Option Set mode

The Option Set mode can be accessed when "BAK"
or "TVo" is set to "OK" ([BANK/OPT] key) setting in the
Initial Set mode (p� 8-6)�

Option Set mode items

NOTE: The default settings may differ, depending on
the transceiver version�
DTMF Memory encoder
Turns the DTMF Memory encoder ON or OFF�
L When the function is turned ON, the 100 MHz digit on the
function display is changed to "d�"
L See page 6-2 for details�
• OF: Turns OFF the function�
• ON: You can enter and transmit a DTMF code�
AO
NAR
MID
LOW
ANM
S ET MONI
AF output selection
The IC-V3500 has 3 AF output selections� Select the
audio output that suits you�
L This item may not be displayed, depending on the
transceiver version�
L When the setting of this item is changed, the "RSP" (AF
output selection) setting in the Marine Set mode will be
set as follows�
• OF: The received audio is output from only the
speaker jack�
(When no external speaker is connected,
audio is output from the internal speaker�)
• AL: The received audio is output from both the
internal speaker and the speaker jack�
• IN: The received audio is output from only the
internal speaker�
NAR
MID
LOW
ANM
S ET
MONI
(Default: OF)
AO
NAR
MID
LOW
ANM
S ET MONI
(Default: OF)
AO
1� Hold down [BANK OPT] for 1 second to enter the
Option Set mode�
2� Push [SET LOCK] or [MONI ANM PA] to select the
desired item�
3� Rotate [DIAL] to set an option or value�
4� Push any key other than [SET LOCK] or
[MONI ANM PA] to save and exit the Option Set
mode�
8-8