Icom IC-V3500 Advanced Manual page 53

DTMF MEMORY
6.
Entering a DTMF code
Using the HM-133V microphone
1� Hold down [BANK/OPTION] for 1 second to enter
the Option Set mode�
2� Push [MR/CALL] to select "DTM" (DTMF Memory
channel)�
3� Push [▲] to select "ON."
• The DTMF Memory encoder is turned ON�
4� Push [SET B D-OFF] to enter the DTMF Memory
mode�
• The DTMF Memory Channel number blinks�
L The previously entered DTMF code is displayed, if set�
NOTE: The previously entered code in the selected
DTMF Memory channel will be cleared by doing the
following steps�
5� Push [▲] or [▼] to select the desired blank DTMF
Memory channel�
6� Push a keypad key to set the desired DTMF code�
• The transceiver automatically enters the DTMF
Memory Programming mode�
L The [0] to [9], [A] to [D], [ ] (E), and [#] (F) keys can
be used�
[E] [F]
L When the 6th character is set, the next 6 blank digit
group will be displayed�
L If a wrong key is pushed, push [▲] or [▼] to set the
code once, and then push keypad keys to reset it�
7� Repeat step 6 until the desired DTMF code entry
(up to 24 digits) is completed�
8� Push [▲] or [▼] to set the code.
9� Push [VFO/LOCK] to exit the DTMF Memory
Programming mode�
• The 100 MHz digit is changed to "d�"
L To go back to the Option Set mode, push
[BANK/OPTION]�
Example: Entering "5428AB453" into DTMF
Memory channel "d3."
Hold down for 1 second to enter the Option Set
mode�
NAR
MID
LOW
ANM
S ET MONI
Push to select "DTM�"
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Push to select "ON�"
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Push enter the DTMF Memory mode�
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Push or to select "d3�"
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Push to enter "5�"
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Repeatedly push keypad keys until the
desired DTMF code entry is complete�
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Push or to set the code�
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Push to exit the DTMF Memory Programming
mode�
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
6-3
AO
PRIO SCAN
PRIO SCAN
The DTMF Memory Channel
number blinks�
PRIO SCAN
PRIO SCAN
PRIO SCAN
PRIO SCAN
The DTMF Memory Channel
number stops blinking�
PRIO SCAN
The 100 MHz digit is
changed to "d�"
PRIO SCAN
V/MHz