Icom IC-V3500 Advanced Manual page 67

SET MODES
8.
Set mode items
Tuning step (Default: Depending on the version)
Sets the VFO tuning step to 5, 6�25, 10, 12�5, 15, 20,
25, 30, or 50 kHz�
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
Scan Stop timer
Selects the Scan Stop timer� When receiving a signal,
the scan pauses for this set period of time�
• 2 ~ 20: When a signal is received, the scan pauses
for 2 ~ 20 seconds (in 2 second steps)�
• HO: The scan pauses on a received signal until
the signal disappears�
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
Scan Resume timer
Selects the Scan Resume Timer� When a received
signal disappears, the scan resumes for this set
period of time�
• 0: The scan resumes immediately after the
signal disappears�
• 1 ~ 5: The scan resumes 1 ~ 5 seconds after the
signal disappears�
• HO: The scan remains paused for the "SCP"
(Scan Stop timer) setting, even if the signal
disappears�
NOTE: Rotate [DIAL] to resume the scan�
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
Display dimmer
Sets the backlight brightness level to between 1 (Dark)
and 4 (Bright)�
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
DIGITAL PRIO AO BUSY
(Default: 10)
DIGITAL PRIO AO BUSY
(Default: 2)
DIGITAL PRIO AO BUSY
(Default: 4)
DIGITAL PRIO AO BUSY
Auto dimmer
Sets the Auto Dimmer brightness�
The Auto Dimmer function automatically reduces the
backlight brightness�
• ATD OF: Turns OFF the function�
The display backlight is continuously
turned ON while the transceiver is
turned ON�
• AT OF: The display backlight is automatically
turned ON when operating the
transceiver� The backlight is
automatically turned OFF when no
operation has been performed for 5
seconds�
• AT D1 to D3: The display backlight is automatically
turned ON when operating
the transceiver� The backlight
automatically returns to the D1 ~ D3
set level when no operation has been
performed for 5 seconds�
MUTE
NAR
MID
LOW
LOCK
S ET
Display contrast
Sets the LCD contrast to between 1 (lowest contrast)
and 4 (highest contrast)�
MUTE
NAR
MID
LOW
LOCK
S ET
Transmit permission
Turns the TX Inhibit function ON or OFF�
• OF: Turns OFF the function�
• ON: Transmit is inhibited�
L This function can be independently set for each Memory
channel, Call channel, and the VFO mode�
PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
8-3
(Default: ATD OF)
DIGITAL PRIO AO BUSY
ANM
MONI
PRIO AO BUSY
ANM
MONI
(Default: ON)
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
(Default: 2)
PRIO AO BUSY