Icom IC-V3500 Advanced Manual page 5

1 ADVANCED OPERATIONS
Emergency Call function
The Emergency Call function is used when you are in
an urgent situation
When the function is ON, an Emergency signal is
transmitted to let the other stations and people know
that you require assistance, and an alarm sounds
from the internal speaker
You can also receive the Emergency signal from other
stations
DAssigning the Emergency Call
function to [BANK OPT]
1 While holding down [SET LOCK], hold down [ ]
for 1 second to enter the Initial Set mode
2 Repeatedly push [SET LOCK] or [MONI ANM PA]
to select "OK" ([BANK OPT] key)
3 Rotate [DIAL] to select "EMR"
4 Push [ ] to save and exit the Initial Set mode
DSetting the Emergency frequency
1 While holding down [SET LOCK], hold down [ ]
for 1 second to enter the Initial Set mode
2 Repeatedly push [SET LOCK] or [MONI ANM PA]
to select "EM" (Emergency channel)
3 Rotate [DIAL] to select a channel
L Empty channels will not be displayed
4 Push [ ] to save and exit the Initial Set mode
DSetting the Emergency alert volume
1 While holding down [SET LOCK], hold down [ ]
for 1 second to enter the Initial Set mode
2 Repeatedly push [SET LOCK] or [MONI ANM PA]
to select "EV" (Emergency Alert volume)
3 Rotate [DIAL] to select the options
L See page 8-7 for details
4 Push [ ] to save and exit the Initial Set mode
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
When "EMR" (Emergency) is selected in the
[BANK OPT] key item
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
When "VFO" (VFO frequency) is selected in the
Emergency channel item
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
S ET MONI
The Emergency Alert volume item
1-2