Table of Contents
Advertisement
4-3 REPEATER SETTINGS
This section describes about the required IP address and LTE settings in the Utility for ID-RP3.
L The IP addresses shown in the figure are examples. Set appropriate IP addresses according to your environment.
■ USING A GATEWAY SERVER
Digital Network
[LAN 1]
172.16.0.1/24
GW: Blank
[LAN 2]
10.0.0.201/8
GW: Blank
eth0 (To the LTE)
10.0.0.200/8
GW: 10.0.0.201
eth1 (To the repeater)
172.16.0.20/24
GW: Blank
LTE network
Gateway server
(Linux PC)
4-8
Trust
server
Internet
Advertisement
Table of Contents
