Repeater Settings; I Id-Rp2C Settings - Icom ID-RP2 Instruction Manual

7

REPEATER SETTINGS

I ID-RP2C setting
Click
Click
A LAN cable
(patch connection; purchase separately)
used for the ID-RP2C setting.
And the fixed IP address that can be communicated to
the ID-RP2C must be set to the PC in advance.
Refer to the instruction manual of the PC or LAN card
for IP address setting details.
q Start up Windows.
w Connect the ID-RP2C [10BASE-T] connector and
the PC's LAN port through a LAN cable (Patch con-
nection; purchase separately), then turn the ID-
RP2C power ON.
e Start up the utility for ID-RP2C.
• Double click "ID-RP2C" icon on the desktop, or select
the ID-RP2C utility from "Program" in "Start" menu.
r The screen as at left appears.
• Check the IP address and the UDP port number using
the "Network Setup" as described in w Option menu in
advance. (p. 38)
• Click [Read].
t "Network Password" screen appears.
Enter the password then click [OK].
• Enter the password with alphanumeric characters (case
sensitive).
• "PASSWORD" (capital letters) is the default password.
y Reads the ID-RP2C settings then the screen as at
left appears.
• When the error message screen appears, confirm the
LAN cable connections, IP address and subnet mask for
the PC.
• And check the IP address and UDP port settings are set
to "172.16.0.1 (default)" and "20319 (default)" respec-
tively in "Network Setup" screen by selecting "Network
Setup..." in "Option" menu.
u Set the specified call sign, IP address, repeater
configuration and microwave link repeater condi-
tions.
• After the setting, click [Write] to transfer and program the
setting into ID-RP2C.
• See the next page for the details of each item.
i Quit the utility.
• Select "Exit" in "File" menu or click
37
is
Enter "PASSWORD"
then click.
" "
on the title bar.