Furuno FAR-2107 Series Service Manual page 7

2. 30 kW TR UP Radar
2.1 Necessary Parts
Necessary parts
RFC cover: 37S
Spacer for RFC cover: M3 x 15
EMI core: RFC13
EMI core: RFC8
Cable tie: 100 mm
Jumper wire: 140 mm
EMI core: RFC10
Cable clump
M3 x 12 screw
Microwave absorbent: 150 x 60
2.1 Addition of RFC cover
1. Set up the RFC cover and cable ties as shown in Fig. 2.1.
2. Replace the fixing screws with the spacer.
3. Disconnect the plug P803.
4. Add EMI cores to the cables as shown in Fig. 2.2.
RFC13
(J803, J804, J805)
Q'ty
1 pc.
7 pcs.
1 pc.
2 pcs.
6 pcs.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
Fig. 2.1 RFC cover
3
2. 30 kW TR UP modification
Table 2.1 Parts list
Modification No.
Fig. 2.1
Fig. 2.1
Fig. 2.1
Fig. 2.1
Fig. 2.1
Fig. 2.2
Fig. 2.3
Fig. 2.3
Fig. 2.3
Fig. 2.4
RFC8 (J802)
Fig. 2.2 Add EMI core