Furuno FAR-2107 Series Service Manual page 239

1 BACK
2 CHART COLOR
3 OWN TRACK INTERVAL
4 OWN TRACK COLOR
5 TRG TRACK INTERVAL
6 TRG TRACK COLOR
5 PLOTTER
7 CURSOL L/L ALIGN
SPU Ver. 02.40
and after
8 [DATA ERASE]
9 [DISPLAY]
0 AUTO TARGET TRACK
1 BACK
2 CHART COLOR
3 [OWN TRACK]
4 [TRG TRACK]
5 PLOTTER
SPU Ver. 50.08
5 CURSOL L/L ALIGN
and after
6 [DATA ERASE]
7 [DISPLAY]
8 [GPS BUOY]
Specifies the chart color
A chart is drawn in PLOTER and RADAR + PLOTER.
NOTE: Not displayed when it is IMO type in the [Menu]
-> 0 -> 4 -> 7:TYPE.
Sets the track interval and track color of the own ship and
other ship.
NOTE: Not displayed "5 TRG TRACK INTERVAL" and
"6 TRG TRACK COLOR" when it is IMO type in the
[Menu] -> 0 -> 4 -> 7:TYPE.
Sets whether to add the offset value after chart offset to the
L/L value of the cursor (+) or not. Offset the L/L position
on the radar map and radar screen.
During the offset, "ALIGN" is displayed if the cursor icon
is set to L/L. For offset, execute CHART ALIGN in the
[Cursor] menu.
Erases the own track, target track, mark, WPT and NAV
line.
Turns on and off the L/L line, past position, mark land
density, place name and buoy displayed on the plotter
screen.
When setting ON, The tracking of No.1-15 acquired target
by ARP is displayed automatically. In advance, specify the
above other ship's tracking interval and color.
If it is OFF, after selecting the other ship's tracking ON
(TARGET TRACK ON) in the cursor menu, select the
target to track.
NOTE: Not displayed when it is IMO type in the [Menu]
-> 0 -> 4 -> 7:TYPE.
Setting for the chart color
The chart is drawn in the PLOTER and DISPLAY
DOCKING.
NOTE: Not displayed when it is IMO type in the [Menu]
-> 0 -> 4 -> 7:TYPE.
Setting for own ship/other ship's tracking interval and
color.
NOTE: 4 [TRG TRACK] is not displayed when it is IMO
type in the [Menu] ! 0 !4 -> 7:TYPE.
Setting whether the compensation value which is
compensated the chart is added to L/L value of the cross
cursor.
Compensation position of L/F on the radar map and
display. While it is performed, "ALIGN" appears when
the cursor icon is displayed to L/L. To compensate,
perform "CHART ALIGN" in the cursor menu.
Own ship, the other ship's track, mark, destination and
course are erased.
ON/OFF setting for L/L line, track, mark, land, place
name, buoy, etc. which is displayed on the plotter screen.
ON/OFF setup of GPS buoy display and erasing setup of
the track.
Input the position data of GPS to the TRACK CONTROL
port.
3-29
3.3 Main Menu Tree