Furuno FAR-2107 Series Service Manual page 401

6.6 Saving to Card I/F Unit: CU-200
6.6.1 Contents to be saved for CU-200
When the CU-200 is installed, the following items can be saved to the memory card in
"[Menu] -> 6: CARD".
- 4. WR MARK
- 5. WR NAV LINE WPT
- 6. WR OWN TRACK
- 7. WT TARGETTRACK
- 8. WR SETTING DATA
- 9. WR INSTALLATION DATA
If the SPU board is replaced, retrieve the file written in "[Menu] -> 6 -> 3".
When retrieve the INSTALLATION DATA file: Ixxxxxxxx, and if "POWER ON
RESTART" is displayed in the ALERT BOX, turn off the power once.
See the following pages for the items to be written in "8. WR SETTING DATA" and "9.
WR INSTALLATION DATA".
1. [4. WR MARK]
Entered marks are saved. The number of points to be stored can be checked in the
[MARK] box menu. The maximum number of storable points is 20,000.
2. [5. WR NAV LINE WPT]
"[Menu] -> 8 -> 7:WPT LIST, 9: NAV LINE LIST" is stored.
3. [6. WR OWN TRACK]
The own ship track is stored. The number of points to be stored can be checked in the
[MARK] box menu. The maximum number of storable points is 20,000.
4. [7. WT TARGET TRACK]
The other ship track is stored. The number of points to be stored can be checked in
the [MARK] box menu. The maximum number of storable points is 15,000.
(File name: Mxxxxxxx)
(File name: Wxxxxxxx)
(File name: Txxxxxxx)
(File name: Axxxxxxx)
(File name: Sxxxxxxx)
(File name: Ixxxxxxx)
(File name: Mxxxxxxx)
(File name: Wxxxxxxx)
(File name: Txxxxxxx)
(File name: Axxxxxxx)
6-45
6.6 Saving to Card I/F Unit: CU-200