Furuno FAR-2107 Series Service Manual page 245

Reference-1: Shuttle Ferry
A shuttle Ferry mode is for the ship that can be steered from the two locations, forward and
reverse. The orientation of radar is presentation rotated at 180 degrees by switching
(contact closure signal) from external equipment via RS-232C port on the TB board of
RPU-013 as shown below.
When operations switched, "REVERSE" is displayed in red characters on the right of
"PRESENTATION MODE" box icon.
RPU-013
This set-up is performed by "OFF/MODE-1/MODE-2.".
- OFF: turn off the "SHUTTLE FERRY" function.
- MODE-1: When Gyro input data is offset.
- MODE-2: When Gyro input data is not offset. (add to 180 degrees in the FAR)
Gyro: 000 deg. Gyro: 180 deg.
Normal Reverse
J601:RS-232C
1. NC
Terminal p.c.b
2. RXD
3. TXD
4. NC
5. GND
6. NC
7. NC
8. NC
9. NC
3-35
Gyro: 000 deg.
Stern up
Normal/Reverse SW
3.3 Main Menu Tree