Furuno FAR-2107 Series Service Manual page 211

3.1 Overview of Menu Operations
3.1.1 Access the menus
- MAIN menu
Press the [MENU] key or place the cursor on the [MENU] box and click the left
button.
- Box marked with [ ]
Place the cursor on the box and click the right button.
HDG, SPD, OS POSN, ARPA, AIS, TRAIL, TARGET LIST, BRILL,
MARK, PICTURE, ANT, CURSOR
* To access the CURSOR menu, place the cursor on the display area of the
radar and click the right button.
Optional Menu for service engineer.
- INITIALIZE menu
Press the [MENU] key five times while pressing the [1:HL OFF] key.
- FACTROY menu
Press the [2], [3] or [4] key while pressing the [1:HL OFF] key.
Note:
1. When the "+" cursor is changed, it shows any selection is made.
The menu selection screen has a timeout of 30 seconds and the Menu box disappears.
2. After you change the some setting, wait for six seconds before turning off the power.
Otherwise, it is not saved.
3. There is a Menu guidance box (xxx/xxx) in the lower right of the screen.
090
100
110
120
130
TARGET
LIST
140
GZ1
GZ2
150
ALARM1
ALARM2
160
170
180
CU/TM
>3.682NM<
VRM1 RESET
ALARM
5.221NM
VRM2
ACK
Left-click
Fig. 3.1.1 Position of Guidance Box
Chapter 3. Menu Tree
*)
ARP,
AIS DATA BOX
ARPA OFF AIS DISP
OFF
MANU
VECTOR TRUE 30M
PAST POSN REL 3M
CPA LIMIT 0. 5NM 22MIN
ALERT BOX
Guidance
Box
TARGET CURSOR
DATA & ACQ MENU
Right-click
3-1
3.1 Overview of Menu Operations