Furuno FAR-2107 Series Service Manual page 241

[NAV LINE WPT 1/2]
1 BACK
2 NAV LINE DATA
3 NAV LINE SELECT
4 SKIP NEXT WPT
5 NAV LINE WIDE
6 [WPT SET]
7 [WPT LIST]
8 NAV LINE 8 [NAV LINE SET]
WPT
9 [NAV LINE LIST]
0 NEXT
[NAV LINE WPT 2/2]
1 BACK
2 ARRIVAL WPT ALARM
3 TURNING LINE
4 DISP WPT NO.
5 DISP WPT NAME
Displays the navigation line received from external
equipment or from registered by the radar.
Selects the Navigation line to be displayed.
Skips the next waypoint in the navigation waypoints.
Allows the setting of the navigation line width.
Allows registering waypoint up to 200 points.
For registering waypoints, the cursor (+) or L/L are used.
A registered waypoint is also deleted in this box.
Displays the list of registered waypoints.
Allows the setting of the navigation line based on the
registered waypoints.
Up to 30 navigation lines can be registered. A registered
navigation line is also deleted in this box.
Displays the list of registered navigation lines.
Allows the setting of arrival ranges (presented in a circle)
of the set waypoints and ON/OFF setting of the alarm.
Displays the turning line. The ship data like the trial turn
rate is registered in [Menu] -> 4 -> 4:TRIAL
MANEUVER.
Displays the registered waypoint number of the mark
displayed.
Displays the registered waypoint name of the mark
displayed.
3-31
3.3 Main Menu Tree